Get a Fast Quote

What Does Pressure Washing Cost Per Square Foot in Savannah, GA?

A straight look at per-square-foot pressure washing rates in Savannah, GA, why flatwork and house walls price differently, and what a per-foot number leaves out.

In the Savannah area, pressure washing is commonly figured at roughly 0.10 to 0.30 dollars per square foot for flat concrete like driveways and sidewalks, and a house soft wash runs about 0.20 to 0.50 dollars per square foot of wall area. Roof soft washing sits higher, near 0.20 to 0.60 dollars a square foot, because of the care and safety it demands. Those are honest Lowcountry ballparks, and here is what actually sits behind the per-foot number.

What is the typical per-square-foot rate?

  • Flat concrete (driveways, sidewalks, patios): about 0.10 to 0.30 dollars per square foot, since open flatwork surface-cleans quickly and evenly.
  • House exterior (soft wash): roughly 0.20 to 0.50 dollars per square foot of wall, with textured stucco and old tabby toward the top because they hold more growth.
  • Roof (soft wash): around 0.20 to 0.60 dollars per square foot, reflecting the low-pressure care a shingle, tile, or metal roof requires.

Why do companies quote per square foot at all?

Square footage is the single biggest driver of a wash, so a per-foot rate is a quick, transparent way to scale the price to the size of the job. A 1,500-square-foot Southside ranch and a 3,500-square-foot home in Pooler take very different amounts of time, water, and cleaning solution, and per-foot pricing captures that difference honestly instead of pretending every home costs the same.

What does a per-square-foot rate leave out?

Plenty, which is why no reputable Savannah crew prices a whole job on square footage alone. A per-foot figure does not account for a service minimum (it costs about the same to load the truck and drive out for a small job as a large one), the level of buildup after years under live-oak shade and marsh humidity, the surface type, or access. A steep second story, tight downtown lot, or heavy salt film near the water all add time the tape measure never sees.

Is per-square-foot always the fairest way to price?

Not by itself. Most Savannah companies use square footage to build an estimate, then quote a single flat price for the finished job so there are no surprises. That protects you from a per-foot rate that balloons once a crew "measures" creatively on site. The honest approach is to price the surfaces, judge the condition, and hand you one upfront number. See how the gentle method that drives those numbers works on our Savannah house washing page, and for typical whole-job totals by surface, read our Savannah pressure washing cost guide.

Frequently asked questions

How do I estimate my home's square footage for a quote? For a house wash, wall area matters more than floor area, but your home's listed square footage and number of stories give a crew enough to ballpark it. A quick look or a few photos turns that into a firm, flat price.

Is a per-square-foot rate cheaper for a big house? Often the per-foot rate drops a little on larger jobs, since the fixed setup is spread over more area. But a bigger home still costs more in total because there is simply more surface to clean.

Does heavy mildew change the per-square-foot price? It can. A surface neglected for years under Savannah's humidity and oak shade needs more solution and dwell time per foot than one washed on a schedule, so cleaning before the growth digs in keeps the rate at the lower end. Get an upfront quote for your Savannah property and we will price it flat.

Free estimate

Get your fast quote

Tell us what needs cleaning in your area — we’ll reach out right away.

Free Quote